In order for your pump to operate safely, efficiently, and to its full potential, the correct assembly procedures must be followed. Available with a 32:1 ratio, the Elcometer Typhoon is an affordable airless pump with an excellent, low cost of ownership. It can spray with airless spray tips up to 18 thou (0.45mm) and supports a maximum fluid outlet pressure of 226 bar, or 3278psi. With a low air consumption and low maintenance air motor, the Typhoon has been precisely engineered to deliver excellent results at a low cost of ownership. Combining this with the Anti-Pulsation Chamber with a stainless-steel mesh filter, preventing spray tip blockages, the Typhoon offers high performance and smooth pump change overs for a quality finish. In this video, we teach you how to assemble the Elcometer Typhoon Airless Pump by detailing: - How to Unbox the Pump - How to Assemble the Pump - How to Assemble the Sagola 500 PSAM Spray gun ---- 00:00 - Introduction 00:34 - You Will Need 00:57 - How to Unbox the Elcometer Typhoon Airless Pump 02:10 - How to Assemble the Elcometer Typhoon Airless Pump 07:06 - How to Assemble the Sagola 500 PSAM Spray Gun 10:03 - For More Information ---- For further information about Elcometer Typhoon Airless Pump, click one of the links on screen or simply visit our dedicated spray equipment website at spray.elcometer.com. Or contact Elcometer at sales@elcometer.com. If you would like to learn more about Elcometer's other products, visit our main website www.elcometer.com.

Once your pump and gun has been fully assembled, your pump must be flushed and primed. If your pump and gun is not properly flushed and primed, air or storage oils may still be trapped in the system, potentially resulting in an inconsistent spray pattern, affecting the overall quality of your work. Priming not only reduces the likelihood of this happening, but also minimises wastage, prevents damage, and establishes proper suction. In this video we teach you how to flush and prime the Elcometer Typhoon Airless Pump. --- For this process you will need: - 3 Buckets or pails: - One bucket containing the product you would like to spray with - One filled with solvent to flush out the system - An empty bucket to capture the flushed our solvent. - And the appropriate PPE including a mask. --- 00:00 - Introduction 00:53 - You Will Need 01:23 - How to Perform a High Pressure Test 03:27 - How to Run in and Flush out the Pump and Gun 07:51 - How to Prime the Pump and Gun 10:40 - For More Information --- For further information about Elcometer Typhoon Airless Pump, click one of the links on screen or simply visit our dedicated spray equipment website at spray.elcometer.com. Or contact Elcometer at sales@elcometer.com. If you would like to learn more about Elcometer's other products, visit our main website www.elcometer.com.

Following the proper shut down procedures and regularly cleaning your pump is vital for ensuring it performs to a high standard. Without proper cleaning, your pump may not perform to its full potential, or may even cease operation entirely. If you do not properly clean your pump, it could result in a host of issues such as: - Inconsistent spray pattern - Accelerated wear on components - Blocked filters and fittings And many more issues. In this video we teach you how to safely shut down and clean the Elcometer Typhoon Airless Pump. --- 00:00 - Introduction 00:40 - You Will Need 00:59 - How to Clean the Pump 03:38 - How to Clean the Gun 04:49 - For More Information --- If you would like to learn about our range of spray equipment, visit our spray website: spray.elcometer.com. Or if you would like to learn about our range of other products, visit our main website www.elcometer.com, and please don’t forget to subscribe. ---

Elcometer offers a diverse selection of spray equipment that is designed to meet and exceed the needs of professionals working in spray booths, on manufacturing paint lines, and out on site. Our spray equipment has been engineered to deliver optimal performance, exceptional durability, and unparalleled ease of use. Available with a 32:1 ratio, the Elcometer Typhoon is an affordable airless pump with an excellent, low cost of ownership. It can spray with airless spray tips up to 18 thou (0.45mm) and supports a maximum fluid outlet pressure of 226 bar, or 3278psi. It has been expertly engineered to be compatible with a wide range of water and solvent based products. Including: 1K Epoxy Coatings, Shop Primer Coatings, Inorganic Zinc Primers, 100% Volume Solid Epoxy Coatings, Anti-fouling Marine Coatings, and many many more. If you would like to see the full list of compatible products, check out our catalogue, available on our dedicated spray website spray.elcometer.com. With a low air consumption and low maintenance air motor, the Typhoon has been precisely engineered to deliver excellent results at a low cost of ownership. Combining this with the Anti-Pulsation Chamber with a stainless-steel mesh filter, preventing spray tip blockages, the Typhoon offers high performance and smooth pump change overs for a quality finish. ---- If you would like to learn more about our wide range of spray equipment, check out our dedicated spray equipment website, spray.elcometer.com. To learn about Elcometers other products, visit our main website at www.elcometer.com, and please don’t forget to subscribe. ----