Measure soluble salts on surfaces significantly faster with the new Elcometer 130 Soluble Salt Profiler, which produces values equivalent to the Bresle method in accordance with ISO 8502-9. The Elcometer 130 SSP is a portable, hand-held salt contamination meter which accurately and reliably measures 4 Bresle equivalent readings in 2 minutes – more than 4 times faster than the Bresle patch test. Measuring soluble salts is now more accurate, easier and faster than ever before thanks to the new Elcometer 130 SSP. Key features of this soluble salt meter include: • Bresle equivalent readings in accordance with ISO 8502-9. • Four times faster than Bresle Patches • 2D and 3D salt density profiles providing the peak salt concentration and average reading. • Store up to 3,500 sets of readings or transfer data via Bluetooth® or USB to ElcoMaster® for PC or mobile devices or your own inspection app for instant report generation. • Rugged and reliable, ideal for use in the field or the laboratory. Bresle Test Equivalent Side by side testing under laboratory conditions shows that the Elcometer 130 SSP is equivalent to the Bresle Patch Method in accordance with ISO 8502-9. For more information on the Elcometer 130 SSP Soluble Salt Profiler, contact Elcometer at sales@elcometer.com or visit our website at www.elcometer.com ---- Click here to download the video script in English: https://www.elcometer.com/pub/media/PDF/Video_Scripts/Introducing_the_Elcometer_130_Script.pdf ----- STANDARDS: NSI 009-32, SSPC Guide 15, Bresle Equivalent ISO 8502-9 Test Method

Whether you are using an Elcometer 130 Salt Contamination Meter, or the Elcometer 130 Soluble Salt Profiler, each Elcometer 130 gauge is factory calibrated and ready to use, straight out of the box. The Elcometer 130’s Calibration Verification Tiles allow you to quickly verify the accuracy of your Elcometer 130 anytime and anywhere. The Elcometer Calibration Verification Tiles are used to check each gauge’s measurement electrodes by accurately simulating known salt concentrations. So, by comparing the results on the gauge with the values on the tile, you can quickly and accurately confirm that your Elcometer 130 is working within specification. CONTENTS 0:39 Introducing the Elcometer Calibration Verification Tiles 2:20 Verifying the Elcometer 130 3:15 Verifying the Elcometer 130 SSP As the Elcometer 130 and Elcometer 130 SSP have different measurement plates, there are two different versions of the Calibration Verification Tiles. The Elcometer 130 requires three different Calibration Verification Tiles of different values, and it is recommended that all three tile values are used to confirm the Elcometer 130’s accuracy. However the Elcometer 130 SSP has a single tile, which allows the user to verify each gauge’s accuracy across its measurement range. Before you begin any verification procedure, you must first remove any test paper, magnetic disks, or calibration tiles from the test plate, and then carefully clean and dry the sensors using the deionised water and the sensor wipes provided. For more information on the Elcometer 130 SSP Soluble Salt Profiler, contact Elcometer at sales@elcometer.com or visit our website at http://www.elcometer.com/en/coating-inspection/surface-cleanliness-surface-profile/surface-cleanliness/elcometer-130-ssp-soluble-salt-profiler.html ---- Click here to download the video script in English: https://www.elcometer.com/pub/media/PDF/Video_Scripts/Calibration_Verification_Tile_Elcometer_130.pdf ----- ELCOMETER 130 STANDARDS: SSPC Guide 15 ELCOMETER 130 SSP STANDARDS: NSI 009-32, SSPC Guide 15, Bresle Equivalent ISO 8502-9 Test Method